Wire Rope Hoists
MT-Series Wire Rope Hoists: 1 t to 50 t, Five Configurations
The lifting unit itself — on our cranes, on your existing beams, or as the replacement that brings an old crane back to life. Models MT305 to MT525.
The range
Five Configurations, One Series
Capacity decides the frame; headroom and the beam decide the configuration. The five below cover both ends of the problem.
| Configuration | Capacity | Where it fits |
|---|---|---|
| Foot-mounted | 1–5 t | Fixed lifting positions — bolted where the lift happens |
| Monorail, low-headroom | 1–15 t | Single girder cranes and beams where every metre of hook height counts |
| Monorail, normal-headroom | 1–15 t | Single girder cranes and monorail beams with room to spare |
| Double-rail trolley | 5–50 t | Top-running on double girder cranes — the heavy end of the range |
| Foot-mounted, true vertical lift | 1.5 t | 4/2 reeving — the hook rises dead straight for precision placement |
Choosing the configuration
Headroom Is Usually the Deciding Vote
Capacity narrows the field fast. What settles the choice is almost always the space between the beam and the roof — and what the hook has to do at the top of its travel.
-
Tight building?
Low-headroom monorail units tuck the hoist beside the beam instead of under it — hook height you get back for free.
-
Heavy load?
Above 15 t the double-rail trolley takes over, riding on top of double girder cranes up to 50 t.
-
Precision placement?
True vertical lift with 4/2 reeving keeps the hook rising dead straight — no drift as it climbs.
One accountable team
Installed to FEM and BS EN. Kept Running for a Decade.
-
Installation
Engineered to FEM and BS EN standards, commissioned and load tested — with the documentation your compliance file needs.
Installation services -
Maintenance
Quarterly inspections on a 12-month AMC, with priority call-out — for our cranes and anyone else’s.
How AMC cover works -
Breakdown — 24/7
On-site diagnostics and repair around the clock, across all seven emirates.
Emergency response
Get Your Hoist Specified
Capacity, headroom and the beam it runs on — an engineer matches the MT model and configuration within 24 hours.